Filter
Top Products
22-4
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 22 Adding a StandardACL
Feature History for Standard ACLs
Step 9 Click Apply to save the ACE to your configuration.
Editing an ACE in a Standard ACL
To edit an ACE in a standard ACL, perform the following steps:
Step 1 Choose Configuration > Firewall > Advanced > Standard ACL.
Step 2 In the main pane, select the existing ACE that you want to edit.
Step 3 Click Edit.
The Edit ACE dialog box appears.
Step 4 Enter the desired changes.
Step 5 Click OK.
Feature History for Standard ACLs
Table 22-2 lists each feature change and the platform release in which it was implemented.
Table 22-2 Feature History for Standard Access Lists
Feature Name Releases Feature Information
Standard ACLs 7.0(1) Standard ACLs identify the destination IP addresses of
OSPF routes, which can be used in a route map for OSPF
redistribution.
The feature was introduced.