Filter
Top Products
9-2
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 9 Configuring Trend Micro Content Security
Prerequisites for the CSC SSM
Prerequisites for the CSC SSM
The CSC SSM has the following prerequisites:
• A CSC SSM card must be installed in the ASA.
• A Product Authorization Key (PAK) for use in registering the CSC SSM.
• Activation keys that you receive by e-mail after you register the CSC SSM.
• The management port of the CSC SSM must be connected to your network to allow management
and automatic updates of the CSC SSM software.
• The CSC SSM management port IP address must be accessible by the hosts used to run ASDM.
• You must obtain the following information to use in configuring the CSC SSM:
–
The CSC SSM management port IP address, netmask, and gateway IP address.
–
DNS server IP address.
–
HTTP proxy server IP address (needed only if your security policies require the use of a proxy
server for HTTP access to the Internet).
–
Domain name and hostname for the CSC SSM.
–
An e-mail address and an SMTP server IP address and port number for e-mail notifications.
–
The e-mail address(es) for the product license renewal to which notification e-mails should be
sent.
–
IP addresses of hosts or networks that are allowed to manage the CSC SSM. The IP addresses
for the CSC SSM management port and the ASA management interface can be in different
subnets.
–
Password for the CSC SSM.
Guidelines and Limitations
This section includes the guidelines and limitations for this feature.
Context Mode Guidelines
Supported in single and multiple context modes. In multiple-context mode, all panes under the CSC
Setup node are available only in the admin context. You can restore the default password only in
multiple-context mode in the system context.
ASA 5540 Basic License: 2 contexts.
Optional licenses: 5, 10, 20, or 50 contexts.
For the ASA 5510, 5520, and 5540:
• With a Basic License, the features enabled by default are SMTP virus scanning, POP3 virus scanning and content
filtering, webmail virus scanning, HTTP file blocking, FTP virus scanning and file blocking, logging, and automatic
updates.
• With a Security Plus License, the additional features enabled by default are SMTP anti-spam, SMTP content filtering,
POP3 anti-spam, URL blocking, and URL filtering.
Model License Requirement