Filter
Top Products
68-9
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 68 Configuring IKE, Load Balancing, and NAC
Creating IKE Policies
Lifetime (secs)—Either check Unlimited or enter an integer for the SA lifetime. The default is 86,400
seconds or 24 hours. With longer lifetimes, the ASA sets up future IPsec security associations more
quickly. Encryption strength is great enough to ensure security without using very fast rekey times, on
the order of every few minutes. We recommend that you accept the default.
Time Measure—Choose a time measure. The ASA accepts the following values:.
Assignment Policy
IP addresses make internetwork connections possible. They are like telephone numbers: both the sender
and receiver must have an assigned number to connect. But with VPNs, there are actually two sets of
addresses: the first set connects client and server on the public network; and once that connection is
made, the second set connects client and server through the VPN tunnel.
In ASA address management, we are dealing with the second set of IP addresses: those private IP
addresses that connect a client with a resource on the private network, through the tunnel, and let the
client function as if it were directly connected to the private network. Furthermore, we are dealing only
with the private IP addresses that get assigned to clients. The IP addresses assigned to other resources
on your private network are part of your network administration responsibilities, not part of ASA
management.
Therefore, when we discuss IP addresses here, we mean those IP addresses available in your private
network addressing scheme, that let the client function as a tunnel endpoint.
The Assignment Policy pane lets you choose a way to assign IP addresses to remote access clients.
Fields
• Use authentication server—Choose to assign IP addresses retrieved from an authentication server
on a per-user basis. If you are using an authentication server (external or internal) that has IP
addresses configured, we recommend using this method. Configure AAA servers in the
Configuration > AAA Setup pane.
• Use DHCP— Choose to obtain IP addresses from a DHCP server. If you use DHCP, configure the
server in the Configuration > DHCP Server pane.
• Use internal address pools—Choose to have the ASA assign IP addresses from an internally
configured pool. Internally configured address pools are the easiest method of address pool
assignment to configure. If you use this method, configure the IP address pools in Configuration >
Remote Access VPN > Network (Client) Access > Address Assignment > Address Pools pane.
sha384 SHA 2, 384-bit
digest
Specifies the Secure Hash Algorithm SHA 2 with the 384-bit digest.
sha512 SHA 2, 512-bit
digest
Specifies the Secure Hash Algorithm SHA 2 with the 512-bit digest.
120 - 86,400 seconds
2 - 1440 minutes
1 - 24 hours
1 day