Filter
Top Products
Contents
xx
Cisco ASA 5500 Series Configuration Guide using ASDM
CHAPTER
23 Adding a WebtypeACL 23-1
Licensing Requirements for Webtype ACLs 23-1
Guidelines and Limitations 23-1
Default Settings 23-2
Using Webtype ACLs 23-2
Task Flow for Configuring Webtype ACLs 23-2
Adding a Webtype ACL and ACE 23-3
Editing Webtype ACLs and ACEs 23-4
Deleting Webtype ACLs and ACEs 23-5
Feature History for Webtype Access Lists 23-5
PART
7 Configuring IP Routing
CHAPTER
24 Routing Overview 24-1
Information About Routing 24-1
Switching 24-2
Path Determination 24-2
Supported Route Types 24-2
Static Versus Dynamic 24-3
Single-Path Versus Multipath 24-3
Flat Versus Hierarchical 24-3
Link-State Versus Distance Vector 24-4
How Routing Behaves Within the ASA 24-4
Egress Interface Selection Process 24-4
Next Hop Selection Process 24-4
Supported Internet Protocols for Routing 24-5
Information About the Routing Table 24-6
Displaying the Routing Table 24-6
How the Routing Table Is Populated 24-6
Backup Routes 24-8
How Forwarding Decisions Are Made 24-8
Dynamic Routing and Failover 24-8
Information About IPv6 Support 24-9
Features That Support IPv6 24-9
IPv6-Enabled Commands 24-10
Entering IPv6 Addresses in Commands 24-10
Disabling Proxy ARPs 24-11