Filter
Top Products
Contents
xxv
Cisco ASA 5500 Series Configuration Guide using ASDM
Default Settings for IPv6 Neighbor Discovery 31-6
Configuring the Neighbor Solicitation Message Interval 31-6
Configuring the Neighbor Reachable Time 31-7
Configuring the Router Advertisement Transmission Interval 31-7
Configuring the Router Lifetime Value 31-8
Configuring DAD Settings 31-8
Configuring IPv6 Addresses on an Interface 31-9
Suppressing Router Advertisement Messages 31-10
Configuring the IPv6 Prefix 31-10
Adding an IPv6 Static Neighbor 31-11
Editing Static Neighbors 31-11
Deleting Static Neighbors 31-12
Viewing and Clearing Dynamically Discovered Neighbors 31-12
Additional References 31-13
Related Documents for IPv6 Prefixes 31-13
RFCs for IPv6 Prefixes and Documentation 31-13
Feature History for IPv6 Neighbor Discovery 31-13
PART
8 Configuring Network Address Translation (ASA 8.3 and Later)
CHAPTER
32 Information About NAT (ASA 8.3 and Later) 32-1
Why Use NAT? 32-1
NAT Terminology 32-2
NAT Types 32-3
NAT Types Overview 32-3
Static NAT 32-3
Information About Static NAT 32-3
Information About Static NAT with Port Translation 32-4
Information About One-to-Many Static NAT 32-6
Information About Other Mapping Scenarios (Not Recommended) 32-7
Dynamic NAT 32-8
Information About Dynamic NAT 32-9
Dynamic NAT Disadvantages and Advantages 32-10
Dynamic PAT 32-10
Information About Dynamic PAT 32-10
Dynamic PAT Disadvantages and Advantages 32-11
Identity NAT 32-11