Filter
Top Products
CHAPTER
22-1
Cisco ASA 5500 Series Configuration Guide using ASDM
22
Adding a StandardACL
This chapter describes how to configure a standard ACL and includes the following sections:
• Information About Standard ACLs, page 22-1
• Licensing Requirements for Standard ACLs, page 22-1
• Guidelines and Limitations, page 22-1
• Default Settings, page 22-2
• •, page 22-2
• Feature History for Standard ACLs, page 22-4
Information About Standard ACLs
Standard access lists identify the destination IP addresses of OSPF routes and can be used in a route map
for OSPF redistribution. Standard access lists cannot be applied to interfaces to control traffic.
Licensing Requirements for Standard ACLs
The following table shows the licensing requirements for this feature:
Guidelines and Limitations
This section includes the guidelines and limitations for this feature:
• Context Mode Guidelines, page 22-2
• Firewall Mode Guidelines, page 22-2
• IPv6 Guidelines, page 22-2
• Additional Guidelines and Limitations, page 22-2
Model License Requirement
All models Base License.