Filter
Top Products
34-17
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 34 Configuring Twice NAT (ASA 8.3 and Later)
Configuring Twice NAT
Configuring Static NAT or Static NAT-with-Port-Translation
This section describes how to configure a static NAT rule using twice NAT. For more information about
static NAT, see the “Static NAT” section on page 32-3.
Detailed Steps
To configure static NAT, perform the following steps:
Step 1 Choose Configuration > Firewall > NAT Rules, and then click Add.
If you want to add this rule to section 3 after the network object rules, then click the down arrow next to
Add, and choose Add NAT Rule After Network Object NAT Rules.
The Add NAT Rule dialog box appears.