Filter
Top Products
34-33
Cisco ASA 5500 Series Configuration Guide using ASDM
Chapter 34 Configuring Twice NAT (ASA 8.3 and Later)
Configuration Examples for Twice NAT
Step 8 Click OK to add the rule to the NAT table.
Step 9 Add a NAT rule for traffic from the inside network to DMZ network 2:
By default, the NAT rule is added to the end of section 1. If you want to add a NAT rule to section 3,
after the network object NAT rules, choose Add NAT Rule After Network Object NAT Rules.
The Add NAT Rule dialog box appears.