Filter
Top Products
2-63
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Chapter 2 Illustrated Card List for MGX Switches and the MGX 8880 Media Gateway
Front Cards
Note For information on RPM-PR software features and configurations, refer to the Cisco MGX Route
Processor Module (RPM-PR) Installation and Configuration Guide, Release 5.2. For technical
specifications for the RPM-PR cards, see the “RPM-PR Specifications” section on page A-7.
RPM-PR-512
(512 MB DRAM)
NNI/UNI MMF-FE Fast Ethernet, 100BASE-FX; choice of SC or MII
connector. MII connector requires external transceiver.
1
RJ45-4E/B Ethernet 10BASE-T. 4
RJ45-FE Fast Ethernet, 100BASE-FX; choice of RJ-45 or MII
connector. MII connector requires external transceiver.
1
MGX-RPM-1
FE-CP
Fast Ethernet, 100 BASE-TX, with coprocessor and RJ-45
connector.
1
MGX-RJ45-5-
ETH
Ethernet/Fast Ethernet/Gigabit Ethernet, 10 BASE-T,
100 BASE-TX, and 1000 BASE-T with RJ45 connector.
5
Table 2-26 RPM-PR Cards, Interfaces, and Supported Back Cards (continued)
RPM-PR
Switch
Interface
Supported
Back Card Ethernet Interfaces
Number of
Ethernet
Interfaces