Filter
Top Products
D-1
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
APPENDIX
D
Guide to Transceivers (SFPs) Used with MGX
Back Cards
This appendix lists the small form-factor pluggable (SFP) transceivers that are used in MGX products,
and the back cards they are used with. Table D-1 lists which SFP is used with which back card, the SFP
part number, the SFP product ID number, wavelength, fiber type, maximum distance, and connector
type.
Tx/Rx power is not included in this table, because that information is part of Bellcore standards
(GR-253, pages 4-14 to 4-22).
Table D-1 Cross Reference of SFP Transceivers to Back Cards
Back Card
SFP Part
Number SFP Product ID
Wavelength
(nm) Fiber Type
Max. Distance
(meter)
Connector
Type
1
SFP-8-155 10-1308-01 MMF-1-155-SFP 1310 Multimode 200 (w/62.5um
core) or 500
(w/50um core)
LC
10-1283-01 SMFIR-1-155-SFP 1310 Single-mode 15K LC
10-1280-01 SMFLR-1-155-SFP 1310 Single-mode 40K LC
VXSM-BC-4-155 10-1308-01 MMF-1-155-SFP 1310 Multimode 200 (w/62.5um
core) or 500
(w/50um core)
LC
10-1283-01 SMFIR-1-155-SFP 1310 Single-mode 15K LC
10-1280-01 SMFLR-1-155-SFP 1310 Single-mode 40K LC
MGX-2OC12POS 10-1829-01 SMFIR-622-SFP 1310 Single-mode 15K LC
10-1827-01 SMFLR-622-SFP 1310 Single-mode 40K LC
MGX-2GE 30-1301-01 GLC-SX-MM 850 Multimode 200 (with 62.5um
core) or
500 (with 50um
core)
LC
30-1299-01 GLC-LH-SM 1300 Single-mode 10K LC
10-1837-01 GLC-ZX-SM 1550 Single-mode 70K LC