Filter
Top Products
B-15
Cisco MGX 8800/8900 Series Hardware Installation Guide
Releases 2 - 5.2, Part Number OL-4545-01, Rev. H0, May 2006
Appendix
Redundancy Y-Cable
Y Cables for MGX 8950
Table B-15 lists the Y-cables used with various Cisco MGX 8950 cards.
PXM-UI-S3
PXM-UI-S3/B
RJ-45 E1 BITS clock CAB-5686-04 x
PXM-UI-S3
PXM-UI-S3/B
RJ-45 E1 BITS clock CAB-5686-04 x
PXM-UI-S3
PXM-UI-S3/B
DB-15 Alarm output CAB-5607-10 (10-in. Y) x x
PXM-HD SC MMF CAB-MMF-Y-SC x x
BNC-3T3-M BNC 75 ohm, coaxial CAB-BNC-Y/B x
AXSM LC SMF CAB-MMF-LC
CAB-MMF-LC-Y
xx
AXSM MTRJ MMF CAB-MTRJ-SC-MM-3M
CAB-MTRJ-SC-MM-5M
xx
AXSM SC SMF CAB-SMF-Y-SC
CAB-SMF-SC (several)
xx
AXSM
PXM1E
MCC Miniature coaxial
cable, E1
CAB-MCC-BNC
CAB-MCC-BNC-Y
x
AXSM
PXM1E
RBBN T1/E1 CAB-RBBN-16-T1E1-Y
CAB-RBBN-16-T1E1
1
x
PXM-UI-S3 RJ45 EIA/TIA-232 CAB-5684-04
PXM-UI-S3 RJ45 EIA/TIA-232 CAB-5684-04
PXM-UI-S3 RJ45 T1 BITS Clock CAB-5686-04
PXM-HD SC SMF CAB-SMF-Y-SC
1. Two cables required per back card, one TX and one RX.
Table B-14 Y-Cable Product Numbers for MGX 8850 (PXM1E /PXM45), MGX 8850/B, and MGX 8880 Cards (continued)
Back Card
Connector
Hardware
Type/Standard
Interface
Y Cable Cisco
Product Number
MGX 8850
(PXM1E/PXM45), MGX
8850/B, and MGX 8880 MGX 8950
Table B-15 Y-Cable Product Numbers for MGX 8950 Cards
MGX 8950 Card
Connector
Hardware
Type/Standard
Interface Y Cable Product Number
PXM-UI-S3 RJ45 EIA/TIA-232 CAB-5684-04 (6-inch Y)
PXM-UI-S3 RJ45 EIA/TIA-232 CAB-5684-04
PXM-UI-S3 RJ45 T1 BITS Clock CAB-5686-04 (6-inch Y)
PXM-UI-S3 DB15 Alarm Output CAB-5607-10 (10-inch Y)