Filter
Top Products
Introduction and Specifications
Specifications
1
1-7
Table 1-2. Accessories
Model Description
80i-410
80i-1010
Clamp-On DC/AC Current Probes
80J-10 Current Shunt
2620A-05K Field-installable IEEE-488 Option kit (Hydra Data Acquisition Unit only.)
2620A-100 Extra I/O Connector Set: Includes Universal Input Module, Digital I/O and Alarm Output
Connectors.
262XA-801 Diconix(R) 80-column serial printer.
263XA-803 Memory Card Reader for IBM-PC or compatible personal computer. Card reader is external
to the PC and connects to a PC parallel port (LPT1, LPT2, etc.). (2635A Data Bucket only).
263XA-804 256K-Byte Memory Card (2635A Data Bucket only). (This card is supplied with the
instrument.)
263XA-805 1M-Byte Memory Card (2635A Data Bucket only).
26XXA-901 Hydra Logger Applications Package (Version 3.0)
C40 Soft carrying case. Provides padded protection for the instrument. Includes a pocket for the
manual and pouch for the line cord.
M00-200-634 Rackmount Kit. Provides standard 19-inch rack mounting for one instrument (right or left
side.)
PM 8922 Switchable X1, X10 passive probe.
RS40 Shielded RS-232 terminal interface cable. Connects the instrument to any terminal or
printer with properly configured DTE connector (DB-25 socket), including an IBM PC(R),
IBM PC/XT(R) or IBM PS/2 (models 25, 30, 50, P60, 70, and 80).
RS41 Shielded RS-232 modem cable. Connects the instrument to a modem with properly
configured DB-25 male pin connector. Use an RS40 and an RS41 cable in series to
connect with an IBM PC/AT(R).
RS42 Shielded serial printer cable. Contact Fluke for list of compatible printers.
TL20 Industrial test lead set.
TL70A Test lead set (one set is supplied with the instrument).
Y8021 Shielded IEEE-488 one-meter (39.4 inches) cable, with plug and jack at each end.
Y8022 Shielded IEEE-488 two-meter (78.8 inches) cable, with plug and jack at each end.
Y8023 Shielded IEEE-488 four-meter (13 feet) cable, with plug and jack at each end.
Y9109 Binding post to BNC plug.
Footnote:
IBM PC, IBM PC/XT, and IBM PC/AT are registered trademarks of International Business Machines
1-6. Specifications
Table 1-3 contains the specifications for the 2620A and 2625A.
Table 1-4 contains the specifications for the 2635A.