Filter
Top Products
152 Chapter 7 Using the BCM Fault Management System
NN40020-600NN40020-600
3 On the Alarms panel, click the Clear Alarm Log button.
The Alarms table is cleared. Any new alarms will be displayed after the next alarm polling
interval.
Using the Alarm Banner
You can use the Alarm Banner in the BCM Element Manager to view current alarm counts and
recent alarm activity on the BCM system. The Alarm Banner appears on the bottom-right corner of
the BCM Element Manager window. The Alarm Banner is visible at all times, so you do not have
to navigate to the Alarms panel to view alarms. If you notice a change in alarm conditions in the
Alarm Banner — for example a red spike in the Critical category — you can navigate to the
Alarms Panel to view the actual alarm.
The Alarm Banner provides counts of Critical, Major, Minor, and Warning alarms; Information
alarms are not included. You can specify whether to include acknowledged alarms in the Alarm
Banner.