Filter
Top Products
162 Chapter 7 Using the BCM Fault Management System
NN40020-600NN40020-600
33 79 critical Core
Telephony
Core Telephony -
ASM firmware
download error.
Power down the
system and check
the ASM hardware
and the expansion
chassis connections.
If problem persists
replace the ASM or
expansion chassis
hardware.
Yes Yes Yes Yes
34 194 critical Core
Telephony
Core Telephony -
Low Level
Operating error.
Restart system and
contact your local
support group.
Yes Yes Yes Yes
35 224 critical Core
Telephony
Core Telephony -
Error after restore of
data.
Attempt another
restore with a known
good backup. If
problem persists
contact your local
support group.
Yes Yes Yes Yes
36 247 critical Core
Telephony
Core Telephony -
Digital station loop
error.
Verify that all types
of attached sets/
peripherals initialize
and function. If
something is not
working reset it. If
the problem persists
contact your local
support group.
Yes Yes Yes Yes
37 260 minor Core
Telephony
Core Telephony -
Line presence test
failure on system
startup due to no
battery feed on a
trunk line.
Verify all trunks lines
are connected to the
system and in
working condition. If
not disable/enable
the trunk interfaces.
If problems persists
contact your local
support group.
Yes No No No
38 262 minor Core
Telephony
Core Telephony -
No dialtone on trunk
line during seizure.
Check the trunk
interfaces to see if
dialtone is present. If
no dialtone is
present contact your
network provider.
Yes No No No
39 263 minor Core
Telephony
Core Telephony -
Invalid disconnect
sequence error on
an analog trunk line.
Check the analog
trunk interfaces to
ensure all lines are
operating correctly.
If a trunk is showing
busy with no active
calls disable the
trunk interface and
re-enable it. If
problems persist
contact your local
support group.
Yes No No No
40 265 minor Core
Telephony
Core Telephony -
Outgoing trunk
could not be seized.
Handshake between
the system and
network failed.
Check the trunk
interfaces to ensure
all lines are
operating correctly.
If a trunk is not able
to be used contact
your network
provider.
Yes No No No