Filter
Top Products
Chapter 10 BCM50 Utilities 257
BCM50 Administration Guide
The IP Endpoint tokens contain information about each IP endpoint (type, DN, IP address, RTP
port number). The IP Trunk tokens contain information about the IP Trunk used by each endpoint
(if no trunk is used, the token is omitted). The stream info token shows which RTP streams are
enabled between the two endpoints. The Codec token describes the codec type used for the RTP
session. The FPP shows the negotiated value of frames per packet. The Details token shows
additional information about the RTP session.
BCM Monitor can display real-time RTP session statistics for sessions that involve at least one
media gateway. These statistics include information about duration of the session, the number of
bytes and packets sent or received per second and per session. These statistics are useful for
troubleshooting packet loss or routing problems. For information about statistics, see “Using
statistical values” on page 263.
UIP tab
The UIP tab displays information about Universal ISDN Protocol (UIP) activity associated with IP
trunks (MCDN messages), BRI loops, and PRI loops on the BCM50.
You can monitor UIP modules by:
• enabling or disabling monitoring of MCDN over IP messages for calls made over IP trunks
• selecting and configuring a bus used by expansion modules
• selecting the type of ISDN module connected to the expansion unit
• enabling or disabling monitoring of loops on BRI modules connected to the expansion unit