Filter
Top Products
284 Chapter 11 Backing Up and Restoring BCM50 Data
NN40020-600NN40020-600
Performing a scheduled backup to a network folder
To perform a scheduled backup to a network folder
1 In the task panel, click the Administration tab.
2 Open the Backup and Restore folder, and then click Backup.
The Backup panel opens and displays the Immediate Backup tab.
3 Click the Scheduled Backups tab.
The Scheduled Backups panel opens.
4 Click the Add button.
The Add Scheduled Backup window opens.
5 In the Backup To selection field, select Network Folder.
6 Configure the Network Folder attributes.
7 Click the OK button.
The Add Scheduled Backup window opens.
8 In the Optional Components table, select or clear the check box to include or exclude these
components from the backup operation.
Caution: A backup operation can interrupt services running on the BCM. A
warning displays whenever the backup will cause a service interruption. If you
want to perform a backup that does not affect the system, you can exclude
services that would be affected. Alternatively, you can include these services and
perform a backup at a time when the system is typically not in use.
Table 78 Configure Network Folder attributes
Attribute Action
Network Folder Enter the hostname or IP address of the network folder and resource name
For example, \\<server>\<resource>.
User Name Enter the user name associated with the network folder.
Password Enter the password associated with the network folder.
Directory Enter the path to the subdirectory (optional).