Filter
Top Products
Chapter 11 Backing Up and Restoring BCM50 Data 293
BCM50 Administration Guide
Restoring data from the BCM50
To restore data from the BCM50
1 In the task panel, click the Administration tab.
2 Open the Backup and Restore folder, and then click Restore.
The Restore panel opens. The Restore From selection field has BCM as a default value.
3 Click the Restore button.
The Select Components to Restore window opens.
4 Select the optional components that you want to include from the backup file.
5 Click the OK button.
A warning window opens and displays information about components that will be affected by
the restore operation. Read the warning carefully before proceeding.
Caution: A backup operation can interrupt services running on the BCM. A
warning displays whenever the backup will cause a service interruption. If you
want to perform a backup that does not affect the system, you can exclude
services that would be affected. Alternatively, you can include these services and
perform a backup at a time when the system is typically not in use.