Filter
Top Products
280 Chapter 11 Backing Up and Restoring BCM50 Data
NN40020-600NN40020-600
4 Configure the FTP Server attributes.
5 Click the Backup button.
The Backup window opens.
6 In the Optional Components table, select or clear the check box for each component to
include or exclude these components from the backup operation.
7 Click the OK button.
A warning window opens. Read the warning carefully before proceeding.
8 Click the Yes button to proceed.
A progress window opens. When the backup preparation is complete, the Backup Complete
message displays.
9 Click the OK button.
Performing an immediate backup to an SFTP server
To perform an immediate backup to an SFTP server
1 In the task panel, click the Administration tab.
2 Open the Backup and Restore folder, and then click Backup.
The Backup panel opens and displays the Immediate Backup tab.
3 In the Backup To selection field, select SFTP Server.
4 Configure the SFTP Server attributes.
Table 74 Configure FTP Server attributes
Attribute Action
FTP Server Enter the hostname or IP address of the FTP server.
User Name Enter the user name associated with the FTP server.
Password Enter the password associated with the FTP server.
Directory Enter the path to the subdirectory (optional).
Caution: A backup operation can interrupt services running on the BCM. A
warning displays whenever the backup will cause a service interruption. If you
want to perform a backup that does not affect the system, you can exclude
services that would be affected. Alternatively, you can include these services and
perform a backup at a time when the system is typically not in use.
Table 75 Configure SFTP Server attributes
Attribute Action
SFTP Server Enter the hostname or IP address of the SFTP server.