Filter
Top Products
198 Chapter 7 Using the BCM Fault Management System
NN40020-600NN40020-600
401 17120 warning System Set
Based Admin
System Set Based
Admin - Key code
activation failed.
Log back into
System Set based
admin to verify
change. If problem
persists contact your
local support group.
Yes No No No
402 17121 warning System Set
Based Admin
System Set Based
Admin - Key code
set failed.
Log back into
System Set based
admin to verify
keyccode. If problem
persists contact your
local support group.
Yes No No No
403 17130 warning System Set
Based Admin
System Set Based
Admin - Get modem
PDR value failed.
Log back into
System Set based
admin to verify
modem settings. If
problem persists
contact your local
support group.
Yes No No No
404 17131 warning System Set
Based Admin
System Set Based
Admin - Set modem
PDR value failed.
Log back into
System Set based
admin to verify
modem settings. If
problem persists
contact your local
support group.
Yes No No No
405 17140 warning System Set
Based Admin
System Set Based
Admin - LAN ip
address change
failed, ip = X.
Log back into
System Set based
admin to verify
change. If problem
persists contact your
local support group.
Yes No No No
406 17141 warning System Set
Based Admin
System Set Based
Admin - LAN subnet
mask change failed,
mask = X.
Log back into
System Set based
admin to verify
change. If problem
persists contact your
local support group.
Yes No No No
407 17142 warning System Set
Based Admin
System Set Based
Admin - LAN
Gateway change
failed, gateway = X.
Log back into
System Set based
admin to verify
change. If problem
persists contact your
local support group.
Yes No No No
408 17200 critical System Set
Based Admin
System Set Based
Admin - System Set
Based Admin
general critical
alarm.
Problem exists using
System Set Based
Admin. If problem
persists contact your
local support group.
Yes Yes Yes Yes
409 19002 critical Startup ProfileStartup Profile -
Startup Profile had 1
or more errors when
trying to apply.
Check log file on
USB device.
Yes Yes Yes Yes
410 19010 Information Startup ProfileStartup Profile -
Startup Profile
completed
successfully.
No Action Required. Yes No No No
411 19101 warning Startup ProfileStartup Profile -
Startup Profile failed
to apply because
previous log file
exists on USB
device.
Delete existing log
file on USB to
continue.
Yes No No No