Filter
Top Products
226 Chapter 9 Monitoring BCM50 Status and Metrics
NN40020-600NN40020-600
To access the NTP Metrics
1 Open the Element Manager, click the Administration tab, click System Status and then
select NTP Metrics in the navigation tree. See Figure 31.
Figure 31 NTP Metrics
The NTP Metrics panel displays information contained in Table 56.
Table 56 NTP Statistics
Parameter Name Description
Minimum time difference (s) The minimum time change that occurred since NTP was running
Maximum time difference (s) The maximum time difference that occurred since NTP was running
Last Synchronized When the last synchronization occurred
Last Synchronization Status The results of the last synchronization: successful or unsuccessful. If
unsuccessful the reason for the failure is given: failed to contact, or failed
security check. A status of Not Running indicates that NTP is not
configured.