Filter
Top Products
Chapter 11 Backing Up and Restoring BCM50 Data 295
BCM50 Administration Guide
Restoring data from a network folder
To restore data from a network folder
1 In the task panel, click the Administration tab.
2 Open the Backup and Restore folder, and then click Restore.
The Restore panel opens.
3 In the Restore From selection field, select Network Folder.
4 Configure the Restore from Network Folder attributes.
A window opens and displays information about the backup file, including a warning that the
selected backup file will replace the backup file currently stored on the BCM.
5 Click the Open button.
The Select Components to Restore window opens.
6 Select the optional components that you want to include from the backup file.
7 Click the OK button.
A warning window opens and displays information about components that will be affected by
the restore operation. Read the warning carefully before proceeding.
Caution: A restore operation can interrupt services running on the BCM. A
warning displays whenever restoring data will cause a service interruption. If you
want to perform a restore operation that does not affect the system, you can
exclude services that would be affected. Alternatively, you can include these
services and perform a restore operation at a time when the system is typically not
in use.
Table 86 Configure Restore from Network Folder attributes
Attribute Action
Network Folder Enter the hostname or IP address of the network folder and resource name.
For example, \\<server>\<resource>.
User Name Enter the user name associated with the network folder.
Password Enter the password associated with the network folder.
Directory Enter the path to the subdirectory, as applicable (optional).
File Enter the name of the backup file.
Caution: When you proceed to the next step, the selected file will overwrite the
backup file that is stored on the BCM. Ensure that the correct backup file is
selected before proceeding.