Filter
Top Products
294 Chapter 11 Backing Up and Restoring BCM50 Data
NN40020-600NN40020-600
6 Click the Yes button to proceed.
A progress window opens. When the operation is complete, the Restore Complete window
opens.
7 Click the OK button.
Restoring data from your personal computer
To restore data from your personal computer
1 In the task panel, click the Administration tab.
2 Open the Backup and Restore folder, and then click Restore.
The Restore panel opens.
3 In the Restore From selection field, select My Computer.
4 Click the Restore button.
The Open window opens.
5 Select the backup file to restore.
A window opens and displays information about the backup file, including a warning that the
selected backup file will replace the backup file currently stored on the BCM.
6 Click the Open button.
The Select Components to Restore window opens.
7 Select the optional components that you want to include from the backup file.
8 Click the OK button.
A warning window opens and displays information about components that will be affected by
the restore operation. Read the warning carefully before proceeding.
9 Click the Yes button to proceed.
A progress window opens. When the operation is complete, the Restore Complete window
opens.
10 Click the OK button.
Caution: A restore operation can interrupt services running on the BCM. A
warning displays whenever restoring data will cause a service interruption. If you
want to perform a restore operation that does not affect the system, you can
exclude services that would be affected. Alternatively, you can include these
services and perform a restore operation at a time when the system is typically not
in use.
Caution: When you proceed to the next step, the selected file will overwrite the
backup file that is stored on the BCM. Ensure that the correct backup file is
selected before proceeding.