Filter
Top Products
330 Chapter 13 Managing BCM50 Software Updates
NN40020-600NN40020-600
6 Click the OK button.
The Find Software Updates window opens and displays a list of updates found in the
specified location.
7 Select an update. The update must have a status of “Available”.
8 Click the Apply button.
A confirmation window opens.
9 Click the Yes button.
The Software Update Complete confirmation window opens.
10 Click the OK button.
The Updates in Progress table lists the update as “In Progress”. A software update that has
the Reboot Required field checked will automatically reboot the BCM50 once the update has
been applied.
Applying an update from an FTP server
To apply an update from an FTP server
1 In the task panel, click the Administration tab.
2 Open the Software Management folder, and then click the Software Update task.
The Software Update panel opens. The Updates in Progress tab is open.
3 Click the Get New Updates button.
The Get New Updates window opens.
4 Select FTP Server from the Retrieve From selection field.
5 Configure the FTP Server attributes.
Caution: Applying a software update to the BCM50 is a service-affecting
operation. Nortel recommends that you schedule updates for low-traffic hours.
Caution: If a software update has a checkmark applied against it in the Reboot
Req’d column of the Find Software Updates window, the BCM50 will
automatically reboot as soon as the update has been applied. You will not receive a
reboot confirmation before the reboot occurs.
Table 100 Configure FTP Server attributes
Attribute Action
FTP Server Enter the IP address or host name of the remote computer, and the port
number if required.
User Name Enter the user name associated with the FTP server.