Filter
Top Products
Chapter 10 BCM50 Utilities 267
BCM50 Administration Guide
To view Ethernet activity
1 Click the Administration tab.
2 Open the Utilities folder, and then click Ethernet Activity.
The Ethernet Activity panel opens.
3 In the Ethernet Activity area, click the Retrieve button.
Details are displayed in the Results area.
Reset
You can use the Reset utility to:
• reboot the BCM50 system
• perform a warm reset of telephony services
• perform a cold reset of telephony services
• perform a cold reset of the router
Table 68 lists the Reset functions.
Table 68 Reset functions
Function Description Impact
Reboot BCM50 System Restarts the operating system of the
BCM50 system
Temporarily stops all services on the
system. Restarts all services.
This operation does not affect
configuration parameters or
programming.
Warm Reset Telephony
Services
Restarts telephony services running
on the BCM50 system
Restarts all telephony services,
including LAN CTE, Voicemail, and
IP telephony.
This operation does not affect
configuration parameters or
programming.
Cold Reset Telephony
Services
Resets telephony programming of
the BCM50 system to the factory
defaults for that software level
Affects all telephony services,
including LAN CTE, Voicemail, and
IP telephony.
Telephony services restart with all
telephony programming at default
values for the specified region,
template, and start DN, for the
current software release level.
A cold reset erases voice message
mailboxes and messages if the DN
length is not set to system defaults.
For information about setting the DN
length, refer to the BCM50 Device
Configuration Guide.
Cold Reset Router Resets the router programming to
the factory defaults.
Affects services that rely on the
WAN.