Filter
Top Products
Chapter 11 Backing Up and Restoring BCM50 Data 277
BCM50 Administration Guide
Performing an immediate backup to your personal computer
To perform an immediate backup to your personal computer
1 In the task panel, click the Administration tab.
2 Open the Backup and Restore folder, and then click Backup.
The Backup panel opens and displays the Immediate Backup tab.
3 In the Backup To selection field, select My Computer.
4 Click the Backup button.
The Backup window opens.
5 In the Optional Components table, select or clear the check box for each component to
include or exclude these components from the backup operation.
6 Click the OK button.
A warning message appears. Read the warning carefully before proceeding.
7 Click the Yes button to proceed.
A progress window opens. When the backup preparation is complete, the Save window opens.
8 Specify the directory and enter a file name in the File Name field. Enter a file name with a .tar
extension (e.g. backup2.tar) so that you can examine the file with a utility such as WinZip. If
you do not select the folder backup, the new backup file will be stored in the root of this
folder.
9 Click the Save button.
When the backup is complete the Backup Complete message appears.
10 Click the OK button.
Caution: A backup operation can interrupt services running on the BCM. A
warning displays whenever the backup will cause a service interruption. If you
want to perform a backup that does not affect the system, you can exclude
services that would be affected. Alternatively, you can include these services and
perform a backup at a time when the system is typically not in use.