Filter
Top Products
Chapter 9 Monitoring BCM50 Status and Metrics 225
BCM50 Administration Guide
Figure 30 UPS Status page
NTP Metrics
Using Network Time Protocol (NTP), you can configure the time on the BCM50 indirectly from a
single time server. NTP is a network protocol designed to synchronize the clocks of computers
over an IP network. The NTP Metrics provide an overview of the integrity of the NTP time source.
This section provides the procedure “To access the NTP Metrics”.
Note: If the BCM50 clock control has not been configured to use NTP
(Configuration>System>Date & Time), then the NTP Metrics panel displays no
data.