Filter
Top Products
Chapter 9 Monitoring BCM50 Status and Metrics 235
BCM50 Administration Guide
Figure 34 Denied calls details
Table 58 describes each field on the two CbC metrics panels.
Hunt Group Metrics
Hunt groups provide a service where incoming calls ring on a targeted group of telephones called a
Hunt group. When you designate a Hunt group, you define the group as a unique Directory
Number (DN). This DN receives and distributes calls to the telephones assigned to the group.
Table 58 Details for a Line Pool
Attribute Value
Call By Call Limit Metrics table
Line Pool Read-only. The pool of lines that call-by-call limits are applied
to.
Calls denied because CbC limits were exceeded table
Service Type Read-only. The type of service that the limits apply to.
INCOMING due to Outgoing
Min.
Read-only. The number of incoming calls that have been
blocked due to the call-by-call limits.
due to Incoming Max. Read-only. The number of incoming calls that have been
blocked due to the call-by-call limits.
Outgoing due to Incoming Min. Read-only. The number of outgoing calls that have been
blocked due to the call-by-call limits.
due to Outgoing Max. Read-only. The number of outgoing calls that have been
blocked due to the call-by-call limits.
Actions
Clear To clear the table so you can start a monitoring period:
1. Click on the Action menu item.
2. Select Clear.
3. Close the panel.
4. If you determine that the call denials are too numerous,
increase lines that support the affected service type.