Filter
Top Products
3–Interactive Commands
Target Link Speed or iiDMA Settings Menu (Command Line Option -q)
SN0054614-00 K 3-49
iiDMA settings have been saved to selected target(s)
on HBA instance n.
To exit iiDMA Settings without making any changes, select No.
5. To use Advanced Configuration:
a. Select the adapter.
b. From the device list, select a device (disk) that is currently attached to
this adapter.
c. From the iiDMA speed list, select the iiDMA (1 Gbps, 2 Gbps, 4 Gbps,
or 8 Gbps) that you want to set for this device.
d. Repeat the previous step for additional devices.
e. Choose one of the following options:
To proceed, select Select the Apply changes to selected
target(s). The following is returned:
The iiDMA settings have been saved to selected
target(s).
To exit without making any changes, select Return to Previous
Menu.
HBA Port Instance
5: Target Link Speed Target Link Speed Menu for HBA instance 1-n
This option shows the Target Link Speed Menu or iiDMA Settings Menu for a
specific port instance.This menu looks like the Target List Menu shown in “Per
Target/LUN” on page 3-38. It includes a list of all targets attached to the selected
port instance and specific information about each target, including:
Target Type (for example, Disk)
Product Vendor
Product ID
Product Revision
Serial Number
Port Name
Port ID
Max Target Link Rate
Next Target Type (for example, Disk)
Apply Changes to Selected Targets
Here is an example of the Target Link Speed Menu for all adapter instances:
Target Link Speed Menu