Q-Logic FC Network Card User Manual


 
B–XML Format 2
XML Format 2 Tags for Each Option
B-24 SN0054614-00 K
<RXPowerLowWarning>"value"</RXPowerLowWarning>
<Rx_PWR-4>"value"</Rx_PWR-4>
<Rx_PWR-3>"value"</Rx_PWR-3>
<Rx_PWR-2>"value"</Rx_PWR-2>
<Rx_PWR-1>"value"</Rx_PWR-1>
<Rx_PWR-0>"value"</Rx_PWR-0>
<Tx_I_Slope>"value"</Tx_I_Slope>
<Tx_I_Offset>"value"</Tx_I_Offset>
<Tx_PWR_Slope>"value"</Tx_PWR_Slope>
<Tx_PWR_Offset>"value"</Tx_PWR_Offset>
<T_Slope>"value"</T_Slope>
<T_Offset>"value"</T_Offset>
<V_Slope>"value"</V_Slope>
<V_Offset>"value"</V_Offset>
<Checksum> "value" </Checksum>
<Temperature_MSB> "value" </Temperature_MSB>
<Temperature_LSB> "value" </Temperature_LSB>
<Vcc_MSB> "value"</Vcc_MSB>
<Vcc_LSB> "value"</Vcc_LSB>
<TX_Bias_MSB> "value" </TX_Bias_MSB>
<TX_Bias_LSB> "value" </TX_Bias_LSB>
<TX_Power_MSB>"value" </TX_Power_MSB>
<TX_Power_LSB> "value" </TX_Power_LSB>
<RX_Power_MSB> "value" </RX_Power_MSB>
<RX_Power_LSB> "value" </RX_Power_LSB>
<Reserved_MSB> "value" </Reserved_MSB>
<Reserved_LSB> "value" </Reserved_LSB>
<Reserved_MSB> "value" </Reserved_MSB>
<Reserved_LSB> "value" </Reserved_LSB>
<StatusControlBits>
<DataReadyBar> "value" </DataReadyBar>
<LOS> "value" </LOS>
<TXFault> "value" </TXFault>
<SoftRXRateSelect> "value" </SoftRXRateSelect>
<RXRateSelectState> "value" </RXRateSelectState>
<SoftTXDisable> "value"</SoftTXDisable>
<TXDisableState> "value" </TXDisableState>
</StatusControlBits>
<TXPowerLowAlarm>"value" </TXPowerLowAlarm>
<TXPowerHighAlarm> "value" </TXPowerHighAlarm>
<TXBiasLowAlarm> "value" </TXBiasLowAlarm>
<TXBiasHighAlarm> "value" </TXBiasHighAlarm>
<VccLowAlarm> "value" </VccLowAlarm>
<VccHighAlarm> "value" </VccHighAlarm>
<TempLowAlarm> "value" </TempLowAlarm>
<TempHighAlarm> "value" </TempHighAlarm>
<RXPowerLowAlarm> "value" </RXPowerLowAlarm>
<RXPowerHighAlarm>"value" </RXPowerHighAlarm>
<TXPowerLowWarning> "value" </TXPowerLowWarning>