Q-Logic FC Network Card User Manual


 
3–Interactive Commands
General Information Menu (Command Line Option -g)
SN0054614-00 K 3-7
Number of Port
Beacon Status
Port Type
Port State
Port Information (repeats for each port) (Every port may not use all items):
Physical Port Number (switch or adapter port number), including:
Port Name (WWPN)
Port State (Online or Loop Down)
Port Type
TX Port Type
Port Module Type
Attached Port (Repeats for every target/initiator that functions as an
attached port). (Not all items may appear for every port):
Target/Initiator
Node Name
Port Name
Vendor ID
Product ID (if applicable)
Product Revision (if applicable)
Product Serial Number (if applicable)
Adapter Model (if applicable)
Adapter Serial Number (if applicable)
Adapter Alias (if applicable)
Port Alias (if applicable)
Driver Version (if applicable)
Firmware version (if applicable)
Total number of devices (targets, if applicable)
Host (if applicable)
Here is an example:
=================================
= InterConnect Element =
=================================
Type : HBA
World Wide Node Name : 20-00-00-E0-8B-03-55-7C
World Wide Port Name : 21-00-00-E0-8B-03-55-7C
Vendor Id : QLogic Corporation
HBA Model : 2200
HBA Serial Number : C28437
HBA Alias :
Port Alias :
Driver Version : SCSI Miniport 8.1.5.15 (W2K IP)
Firmware Version : 2.02.03
Total Number of Devices : 0