Q-Logic FC Network Card User Manual


 
ii SN0054614-00 K
SANsurfer FC/CNA HBA CLI User’s Guide
Command Line Interface for QLogic FC and FCoE Adapters
Information furnished in this manual is believed to be accurate and reliable. However, QLogic Corporation assumes no
responsibility for its use, nor for any infringements of patents or other rights of third parties that may result from its use.
QLogic Corporation reserves the right to change product specifications at any time without notice. Applications
described in this document for any of these products are for illustrative purposes only. QLogic Corporation makes no
representation nor warranty that such applications are suitable for the specified use without further testing or
modification. QLogic Corporation assumes no responsibility for any errors that may appear in this document.
\
Document Revision History
Revision A, August 20, 2004
Revision B, September 28, 2005
Revision C, June 7, 2006
Revision D, October 1, 2006
Revision E, February 1, 2007
Revision F, February 29, 2008
Revision G, June 30, 2008
Revision H, July 16, 2008
Revision J, March 11, 2009
Revision K, June 15, 2009
Changes Sections Affected
Revision K Changes:
Changed product name from “SANsurfer FC HBA
CLI” to “SANsurfer FC/CNA HBA CLI.”
All
Added
QLE81xx and QMI81xx to the list of sup-
ported adapters.
“Supported QLogic Adapters” on page 1-2
Added Red Hat and Novell PowerPC64 to sup-
ported Linux OSs.
“Supported Operating Systems” on page 1-3
Added list of unsupported features for QLE81xx
and QMI81xx adapters on Linux OS.
“Unsupported Features” on page 1-5
Added note recommending uninstalling older ver-
sion rather than upgrading.
“Installing SANsurfer FC/CNA HBA CLI” on
page 1-7
Added new FCoE menu option to Getting Started
chapter.
“Starting Interactive Mode” on page 2-1
Added -cna command line option to Non-interac-
tive Mode Options table.
Table 2-1 on page 2-4