Q-Logic FC Network Card User Manual


 
3–Interactive Commands
Diagnostics Menu (Command Line Options -kl, -kr, and -dm)
SN0054614-00 K 3-87
Address A0
Identifier: SFP
Ext. Identifier: GBIC/SFP defined by serial ID only
Connector: LC
Ethernet Speed: 10 GBytes/Sec
Compliance: 0x00 0x00 0x00
FC Link Length:
FC Transmitter Tech:
FC Transmission Media:
FC Speed:
Encoding: Reserved
BR, Nominal: 0x67
Length (9um) - km: 0x00
Length (9um): 0x00
Length (50um): 0x08
Length (62.5um): 0x03
Length (Copper): 0x00
Vendor name: FINISAR CORP.
Vendor OUI: 0x00 0x90 0x65
Vendor PN: FTLX8572D3BCL
Vendor Rev: A
Wave Length: 0x0352
CC_BASE: 0x3a
Options:-Signal Loss, as defined in SFP MSA: 0x1
-Signal Loss, inverted from SFP MSA: 0x0
-TX_FAULT signal implemented: 0x1
-TX_DISABLE implemented & disables serial o/p: 0x1
-RATE_SELECT implemented: 0x0
BR, max: 0x00
BR, min: 0x00
Vendor SN: UDL0019
Date code: 090220
Diag Monitoring Type:-Address change required: 0x0
-Power Measurement: 0x1
-Externally Calibrated: 0x0
-Internally Calibrated: 0x1
-Digital diag monitoring: 0x1
-Legacy diagnostic: 0x0
Enhanced Options:-Soft RATE_SELECT ctrl & monitoring: 0x0
-Soft RX_LOS monitoring: 0x1
-Soft TX_FAULT monitoring: 0x1
-Soft TX_DISABLE ctrl & monitoring: 0x1
-Alarm/warning flags: 0x1
SFF-8472 Compliance: TBD
CC_EXT: 0xb1
Vendor Specific: 0x51 0x4c 0x6f 0x67 0x69 0x63 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00