Q-Logic FC Network Card User Manual


 
A–XML Format 1
XML Format 1 Tags for Each Option
A-14 SN0054614-00 K
Link Statistics
(Command Line Option -ls)
The XML Format 1 for the link statistics option is as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<QLogic>
<AppName>SANsurfer FC/CNA HBA CLI</AppName>
<AppVersion>vn.nn.nn Build nn</AppVersion>
<HBA>
<HBA Port="value" WWPN="value" WWNN="value" />
<LinkStatus PortName="value"
LinkFailure="value"
SyncLoss="value"
SignalLoss="value"
InvalidCRC="value"
TimeStamp="value" />
<Status> 0 </Status>
<Reboot> 0 </Reboot>
</QLogic>
HBA Statistics
(Command Line Option -gs)
The XML Format 1 for the adapter statistics option is as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<QLogic>
<AppName>SANsurfer FC/CNA HBA CLI</AppName>
<AppVersion>vn.nn.nn Build nn</AppVersion>
<HBA>
<HBA Port="value" WWPN="value" WWNN="value" />
<Statistics LoopID="value"
PortError="value"
NOTE:
The <HBA></HBA> sequence is repeated for each adapter.
The <Target></Target> sequence is repeated for each target.
The <LUN… /> parameter is repeated for each LUN.
The <EnabledLUN ID.… /> parameter is repeated for each enabled
LUN.
The <TargetBinding…/> parameter is repeated for each target
persistent binding entry.
The <BootDevice…/> parameter is repeated for each boot device
selection entry.