Q-Logic FC Network Card User Manual


 
B–XML Format 2
Output Parts
B-2 SN0054614-00 K
Utility Header
The following header information is shown after the main tag:
<AppName> SANsurfer FC/CNA HBA CLI </AppName>
<AppVersion> X.YY.ZZ Build XX</AppVersion>
<AppXMLVersion> X.YY </AppXMLVersion>
Status Message
Before the closing main tag </QLogic>, SANsurfer FC/CNA HBA CLI shows any
returning status from the execution of the command line parameters and the error
messages.
When the execution of the command line parameters is successful, the following
status is shown:
<Status> 0 </Status>
When the execution of the command line parameters fails, the following status is
shown, followed by an error message that provides additional details:
<Status> 1 </Status>
Reboot Message
When the execution of the command line parameters is successful and the
system must be restarted for the change to take effect, the following message is
shown:
<Reboot> 1 </Reboot>
When the execution of the command line parameters is successful and the
system does not need to be restarted, the following message is shown:
<Reboot> 0 </Reboot>
Error Message
When the execution of the command line parameters is fails an Error message
appears between the Status and Reboot tags. d the system must be restarted for
the change to take effect, the following message is shown:
<ErrorMsg> "Details of the failure "</ErrorMsg>