Q-Logic FC Network Card User Manual


 
3–Interactive Commands
General Information Menu (Command Line Option -g)
SN0054614-00 K 3-5
Total number of QLogic adapters detected
------------------------------------------------------------------------------
Host Name : BRAGI
OS Type : Microsoft Windows Svr 2003 Enterprise Ed. x86
OS Version : Service Pack 1 (Build 3790
SDM API Uersion : 1.28.0.50 QLSDM.DLL
------------------------------------------------------------------------------
HBA Model QLA2342 (SN C28750):
Port 1 WWPN 21-00-00-E0-8B-01-43-9B SN B05283 (HBA Instance 0) Online
Port 2 WWPN 21-01-00-E0-8B-21-43-9B SN B05283 (HBA Instance 1) Online
HBA Model QLA2300 (SN D825408):
Port 1 WWPN 21-00-00-E0-8B-05-CB-D8 SN D83179 (HBA Instance 2) Loop down
Port 2 WWPN 21-01-00-E0-8B-25-CB-D8 SN D83179 (HBA Instance 3) Online
HBA Model QLA2462 (SN FFC0551C34679):
Port 1 WWPN 21-00-00-E0-8B-1F-9D-F0 SN FFC0519U93213 (HBA Instance 4)
Online
Port 2 WWPN 21-01-00-E0-8B-3F-9D-P0 SN FFC0519U93213 (HBA Instance 5)
Loop
down
HBA Model QLA21O (SN C655417):
Port 1 WWPN 21—00—00—E0—8B—1A—3F—E0 SN R61343 (HBA Instance 6) Online
-----------------------------------------------------------------------------
Total QLogic HBA(s) : 4
Host Topology
(Command Line Option -tp | -topology)
1: General Information 2: Host Topology
This option shows you the HBA Host Topology menu.
From the General Information Menu, type the number for Host Topology, and
then press
ENTER
. When you select this option, the following options appear:
Display
NOTE:
The SAN Device Management (SDM) API is a QLogic-specific library
required for SANsurfer FC/CNA HBA CLI. The version number of this library
is useful in debugging.
NOTE:
Under Linux, host topology (-tp) is disabled if you are using the IOCTL or
sysfs (inbox) driver.