Filter
Top Products
3–Interactive Commands
Target Link Speed or iiDMA Settings Menu (Command Line Option -q)
SN0054614-00 K 3-47
Target Link Speed or iiDMA Settings Menu
(Command Line Option -q)
5: Target Link Speed or 5: iiDMA Settings
This option shows the Target Link Speed Menu or iiDMA Menu that includes a
list of all adapters and port instances detected, including the options to select:
Each adapter port instance, individually
All adapters
Here is an example of the Target Link Speed Menu or iiDMA Settings Menu:
HBA Model QLA2342:
1. Port 1 WWPN 21-00-00-EO-8B-01-43-9B Online
2. Port 2 WWPN 21-01-00-E0-8B-21-43-9B Online
HBA Model QLA2300:
3. Port 1 WWPN 21-00-00-E0-8B-05-CB-D8 Loop down
4. Port 2 WWPN 21-01-00-E0-8B-25-CB-D8 Online
HBA Model QLA2462:
5. Port 1 WWPN 21-00-00-E0-8B-1P-9D-P0 Online
6. Port 2 WWPN 21-01-00-E0-8B-3P-9D-P0 Loop down
HBA Model QLA21O:
7. Port 1 WiIPN 21-00-00-E0-8B-1A-3F-E0 Online
8. All HBAs
9. Return to Previous Menu
Table 3-3 lists the target link speed settings and descriptions.
NOTE:
Depending on your system, the SANsurfer FC/CNA HBA CLI Main Menu
may show either the Target Link Speed option or the iiDMA Settings
option.
Table 3-3. Target Link Speed Settings
Target Link Speed Settings Description
<address> IP address.
<hba instance> Adapter number (adapter instance number).
<hba wwnn> Adapter world wide port name, format
xx-xx-xx-xx-xx-xx-xx-xx or xxxxxxxx.
<lun id> Logical unit number (0–255).
<speed> Target Link Speed (iiDMA) - (1, 2, or 4 Gbs).