Q-Logic FC Network Card User Manual


 
C–Error/Exit Return Codes
SN0054614-00 K C-3
30 ERROR_INCORRECT_RISC_CODE_FILE Incorrect RISC image
31 ERROR_INCORRECT_BOOT_CODE_FILE Incorrect BIOS/FCode boot image
32 ERROR_INCORRECT_FULL_IMAGE_FILE Incorrect 1M Flash image
33 ERROR_CORRUPTED_FLASH_IMAGE_
FILE
Flash image file is corrupted
34 ERROR_FLASH_UPDATE_FAILURE Failed to update Flash
35 ERROR_FLASH_INVALID_REGION_
SIGNATURE
Incorrect Flash image file
36 ERROR_FLASH_GET_REGION_FAILURE Failed to read Flash update region from
adapter
37 ERROR_FLASH_UPDATE_NO_VALID_
REGION
Failed to validate Flash update region read
from adapter
38 ERROR_FLASH_UPDATE_NO_REGION_
LAYOUT
Adapter does not have Flash update region
layout
39 ERROR_FLASH_UPDATE_INVALID_VPD Flash contains invalid VPD
40 ERROR_DIAGNOSTICS_PARAM_ERROR Diagnostics test returns invalid parameters
41 ERROR_DIAGNOSTICS_LOOP_DOWN Unable to run diagnostics because the loop
is down
42 ERROR_DIAGNOSTICS_FAILURE Diagnostics test failed with errors
43 ERROR_DIAGNOSTICS_DATA_
MISCOMPARE
Diagnostics test failed with data miscom-
pare
44 ERROR_DIAGNOSTICS_UNKNOWN_
STATUS
Unknown diagnostics test status
45 ERROR_DIAGNOSTICS_NO_AVAIL_
TARGET
Unable to run R/W buffer test because
there are no attached devices
46 ERROR_DIAGNOSTICS_NOT_FOUND_
TARGET
Unable to run R/W buffer test because the
excluded device is not available
47 ERROR_DIAGNOSTICS_MAX_FRAME_
SETTING
Unable to run diagnostics because of the
adapter current frame size setting
48 ERROR_INVALID_DIAGNOSTICS_
SETTINGS
Invalid diagnostics test parameter settings
Table C-1. Error/Exit Return Codes (Continued)
Return
Code
Name Description