Q-Logic FC Network Card User Manual


 
A–XML Format 1
XML Format 1 Tags for Each Option
A-20 SN0054614-00 K
<SoftRXRateSelect> "value" </SoftRXRateSelect>
<RXRateSelectState> "value" </RXRateSelectState>
<SoftTXDisable> "value"</SoftTXDisable>
<TXDisableState> "value" </TXDisableState>
</StatusControlBits>
<TXPowerLowAlarm>"value" </TXPowerLowAlarm>
<TXPowerHighAlarm> "value" </TXPowerHighAlarm>
<TXBiasLowAlarm> "value" </TXBiasLowAlarm>
<TXBiasHighAlarm> "value" </TXBiasHighAlarm>
<VccLowAlarm> "value" </VccLowAlarm>
<VccHighAlarm> "value" </VccHighAlarm>
<TempLowAlarm> "value" </TempLowAlarm>
<TempHighAlarm> "value" </TempHighAlarm>
<RXPowerLowAlarm> "value" </RXPowerLowAlarm>
<RXPowerHighAlarm>"value" </RXPowerHighAlarm>
<TXPowerLowWarning> "value" </TXPowerLowWarning>
<TXPowerHighWarning> "value" </TXPowerHighWarning>
<TXBiasLowWarning> "value" </TXBiasLowWarning>
<TXBiasHighWarning> "value" </TXBiasHighWarning>
<VccLowWarning> "value" </VccLowWarning>
<VccHighWarning> "value" </VccHighWarning>
<TempLowWarning> "value" </TempLowWarning>
<TempHighWarning> "value" </TempHighWarning>
<ReservedWarning> "value" </ReservedWarning>
<ReservedWarning> "value" </ReservedWarning>
<ReservedWarning> "value" </ReservedWarning>
<ReservedWarning> "value" </ReservedWarning>
<ReservedWarning> "value" </ReservedWarning>
<ReservedWarning> "value" </ReservedWarning>
<RXPowerLowWarning> "value" </RXPowerLowWarning>
<RXPowerLowWarning> "value" </RXPowerLowWarning>
<VendorSpecific> "value" </VendorSpecific>
</Address_A2>
</HBA>
<Status> 0 </Status>
<Reboot> 0 </Reboot>
</QLogic>
Host Topology
(Command Line Option -tp)
The XML Format 1 for an adapter type interconnect element is as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<QLogic>
<AppName>SANsurfer FC/CNA HBA CLI</AppName>
<AppVersion>vn.nn.nn Build nn</AppVersion>
<InterConnectElement Type="HBA">
<HBA WWNN="value"