Q-Logic FC Network Card User Manual


 
2–Getting Started
Starting Non-Interactive Mode
2-4 SN0054614-00 K
Starting Non-Interactive Mode
To start SANsurfer FC/CNA HBA CLI in non-interactive mode, type the following
in a command window:
scli <parameters>
SANsurfer FC/CNA HBA CLI executes the command options, and then
terminates.
To list all of the available command line parameters and the SANsurfer FC/CNA
HBA CLI version, type one of the following:
scli -h
scli -?
In Solaris SPARC, include double quotes around the view option (?) if the system
is running with a csh or tsch shell. For example:
# scli -e 0 "?"
For world wide node name (WWNN), world wide port name (WWPN), and port ID
parameter inputs, SANsurfer FC/CNA HBA CLI accepts the notation with and
without the dash (–). Hexadecimal values can be uppercase or lowercase.
The following input formats are both valid for the WWNN and WWPN:
20-00-00-E0-8B-01-83-C4
200000E08B0183C4
The following inputs are valid for the port ID:
68-5C-AB 685CAB
All command line options must be preceded by the dash (–) or forward slash (/)
notation. Most options have a corresponding menu selection in interactive mode.
Table 2-1 lists all valid command line options, shows the corresponding menu
selection by OS, and provides a description and cross-reference.
.
Table 2-1. Non-interactive Mode Options
CLI
Option
Interactive
Menu
(Windows)
Interactive
Menu (Red
Hat/SUSE
Linux,
Solaris
SPARC)
Interactive
Menu
(Macintosh)
Description
See User Guide
Section
-a 11 11 11 Flash adapter beacon “-a (View or Tog-
gle Beacon Sta-
tus)” on page 4-6