Q-Logic FC Network Card User Manual


 
3–Interactive Commands
Beacon Menu
SN0054614-00 K 3-75
Beacon Menu
11: Beacon
The Beacon menu provides options for beaconing: a process by which an LED on
a device (adapter or target) is flashed or blinked to locate it. Use the Locate HBA
option to beacon a specified adapter. Use the Locate Target option to beacon a
specified storage device (the Locate Target option assumes that the target is a
JBOD device rather than RAID).
When you select the Beacon option, SANsurfer FC/CNA HBA CLI shows the
Beacon Menu containing these options:
Locate HBA
Locate Target(s)
Locate HBA: HBA Beacon
(Command Line Option -a)
11: Beacon 1: Locate HBA
When you select this option, SANsurfer FC/CNA HBA CLI shows the HBA
Beacon Menu that lists all adapter ports. Select any port, and then press
ENTER
to toggle the Beacon LED for that port:
Locate Target(s): Target Beacon
(Command Line Option -tb)
11: Beacon 2: Locate Target(s)
When you select this option, SANsurfer FC/CNA HBA CLI shows the Target
Beacon Menu that lists all adapter ports. Select any port, and then press
ENTER
to view the disk details of that port, including the current beacon status:
HBA Instance 1 (2200 Port 2) : Online
WWPN: 21-01-00-E0-8B-23-55-7C
Desc: QLA2200 /02/12/04 QLA2202FS QCP2202
1: Disk
Vendor : SEAGATE
Product ID : ST136403FC
Port Name : 21-00-00-20-37-1A-6B-CF
Port ID : 11-01-E4
Beacon : No
NOTE:
The beaconing options are not available for the QLE8042 adapter nor the
QLE/QMI81xx adapters.