Q-Logic FC Network Card User Manual


 
4–Non-Interactive Commands
Command Summary
4-36 SN0054614-00 K
The pairs <param name> <param value> and <param alias> <param value> can
be repeated to set multiple parameters with a single command.
Table 4-14 lists the adapter parameter names and aliases.
.
param alias = Alias of the parameters
param value = New value of the parameters
Table 4-14. Adapter Parameters
Description Name Alias Value
Connection options ConnectionOption CO
See table note
a
Data rate DataRate DR
See table note
b
Enable BIOS
EnableBIOS
c
EB 1=Enable, 0=Disable
Enable extended logging
EnableExtendedLogging
d
EL 1=Enable, 0=Disable
Enable FC tape EnableFCTape EF 1=Enable, 0=Disable
Enable hard loop ID EnableHardLoopID HL 1=Enable, 0=Disable
Enable LIP full login EnableLIPFullLogin FL 1=Enable, 0=Disable
Enable LIP reset EnableLipReset LP 1=Enable, 0=Disable
Enable target reset EnableTargetReset TR 1=Enable, 0=Disable
Execution throttle ExecutionThrottle ET 1–65535
Frame size FrameSize FR 512, 1024, 2048
Hard loop ID HardLoopID HD 0–125
Interrupt delay timer InterruptDelayTimer ID 0–255
Login retry count LoginRetryCount LR 0–255
Link down timeout LinkDownTimeOut LT 0–240
Maximum LUNs per target MaximumLUNsPerTarget ML 0, 8, 16, 32, 64, 128, 256
Operation mode OperationMode OM
See table note
e
Port down retry count PortDownRetryCount PD 0–255
Reset Delay ResetDelay RD 0-255
Table Notes: