Filter
Top Products
3–Interactive Commands
Utilities Menu
SN0054614-00 K 3-67
Maximum LUNs Per Target specifies the maximum number of LUNs per
target. Multiple LUN support is typically for RAID boxes that use LUNs to
map drives.
Port Down Retry Count specifies the number of times SANsurfer FC/CNA
HBA CLI retries a command to a port returning port down status.
Link Down Timeout specifies the time the driver waits for the link to come
up after link down before returning the I/Os. This is analogous to the Port
Down Retry Count setting, which is used when the port is down.
The following tables list the parameter settings supported by templates for the
specified adapters by ISP number.
NOTE:
Settings that are effected by the template apply only to the ISP
2300/2310/2312 2Gb adapters and the ISP2422/2432 4Gb adapters.
Table 3-5. Template Supported Parameter Settings for QLA24xx/QLE24xx and QLE256x
Adapters (ISP2422)
Setting QLogic EMC HP IBM Sun
Execution Throttle 16 256 16 256 256
Descending Loop ID Search 0 0 0 0 0
Maximum LUNs Per Target
*
a
a
Information not currently available.
256 128 256 128
Port Down Retry Count 3045163030
Link Down Timeout 30 45 8 30 30
Table 3-6. Template Supported Parameter Settings for QLA24xx/QLE24xx and QLE256x
Adapters (ISP2432)
Setting QLogic Dell EMC HP IBM Sun
Execution Throttle 16 256 256 16 256 16
Descending Loop ID
Search
011000
Maximum LUNs Per Target 128 256 256 128 256 128
Port Down Retry Count 30 45 45 16 30 30
Link Down Timeout 30 45 45 8 30 30