Filter
Top Products
3–Interactive Commands
Boot Device Menu (Command Line Option -e)
3-60 SN0054614-00 K
Please reboot the system for the saved configuration to become
effective.
Boot Device Menu
(Command Line Option -e)
8: Boot Device
When you select this option, SANsurfer FC/CNA HBA CLI shows the standard
HBA Port Instance menu (see “HBA Port Instance” on page 3-49) allowing you to
select an individual adapter port or All HBAs.
HBA Port Instance
8: Boot Device 1 - m: HBA Port Instance
When you select this option, SANsurfer FC/CNA HBA CLI shows the Boot
Device Settings menu for adapter instance m. You can choose to:
Display Boot Device(s)
Configure Boot Device(s)
Boot Device(s) (Per Adapter Port)
8: Boot Device n: Port Number 1: Display Boot Device(s)
When you select this option, SANsurfer FC/CNA HBA CLI shows the following
information about the boot devices for this adapter instance:
Adapter Instance Number
Adapter Model Number (QLAxxxx)
Port Number (on that adapter)
WWPN
Port ID
Boot Device Settings
Selectable Boot (Enabled/Disabled)
Primary Boot Port Name (WWPN) and LUN
Alternate 1 Boot Port Name and LUN
Alternate 2 Boot Port Name and LUN
Alternate 3 Boot Port Name and LUN
For example:
NOTE:
The Boot Device Menu option is not supported on Red Hat or Novell
PowerPC64.