Q-Logic FC Network Card User Manual


 
3–Interactive Commands
Target/LUN List Menu (Command Line Options -t and -l)
SN0054614-00 K 3-41
3. Delete To delete persistent binding for the LUN, select 3 on the Persistent
Names Menu. SANsurfer FC/CNA HBA CLI lists the existing LUN persistent
binding names, prompts you to select one for deletion, and then immediately
deletes the persistent LUN name. For example:
1: test1
2: Return to Previous Menu
Note: 0 to return to Main Menu
Enter Selection: 1
------------------------------------------------------------
Product Vendor : SANBlaze
Product ID : VLUN FC RAMDisk
Product Revision : 3.1.
LUN : 28
WWULN :
60-00-62-B0-00-0F-53-50-00-00-00-00-00-00-00-1C
OS LUN Name : /dev/sdbh;/dev/sg59;
------------------------------------------------------------
Persistent LUN Name : test1
Persistent device name of LUN 28 (TID 1) has been deleted.
Please reboot or run 'udevtrigger' command for the changes to take effect
Hit <RETURN> to continue:
For the persistent device name deletion to take effect, you must either reboot the
system or run the -udevtrigger command.
All Targets
4: Target/LUN List 1 - n Target List Menu Port n 1 - n: Target m: All LUNs
When you select a specific LUN from the LUN list, the following information for all
LUNs appears:
Product Vendor
Product ID
Product Revision
LUN
Size
Type
WWULN
OS LUN Name (on Solaris and Linux)
(Repeats for each LUN)
CAUTION!
Do not delete a LUN’s persistent device name if there is any active I/O on
the LUN.