Filter
Top Products
4–Non-Interactive Commands
Command Summary
SN0054614-00 K 4-5
Command Summary
The command format for non-interactive mode is:
# scli -(Cmd) (<hba instance> | <hba wwpn>) (view | ?)
Where:
You can combine the commands -o, -s and -x with other options. However, they
must be at the beginning or at the end of the command line. Use these commands
as follows:
-o = Output the results to a file (see “-o (Output to a File)” on page 4-37).
For example:
# scli -l -o
-s = Silent mode (see “-s (Silent Mode)” on page 4-45). For example:
# scli -i all -s -o output.txt
-x = Outputs the results in XML format (see “-x (Output in XML Format 1)”
on page 4-48). For example:
# scli -i all -x -o output.xml
-g Show system information “-g (Display System Information)” on
page 4-18
-i
Show adapter information
“-i (Display HBA General Information
or VPD Information for One or All
HBAs)” on page 4-20
-l Show LUN list “-l (Display LUN Info)” on page 4-32
-m Configure selective LUNs “-m (View, Enable, or Disable LUNs)”
on page 4-33
-p Configure target persistent binding “-p (Display Persistent Target Binding
Info)” on page 4-38
-t Show target list “-t (Display Target Information)” on
page 4-45
hba instance = Adapter port instance (use -g command to find)
hba wwpn = Adapter world wide port name
Table 4-1. Options Shown by -z (Continued)
CLI Description See User Guide Section