Q-Logic FC Network Card User Manual


 
B–XML Format 2
XML Format 2 Tags for Each Option
SN0054614-00 K B-3
XML Format 2 Tags for Each Option
The following sections describe the XML Format 2 for each command line option:
“Display System Information (Command Line Option -g)” on page B-4
“Display Adapter Settings (Command Line Option -c)” on page B-4
“Display HBA Information (Command Line Option -I)” on page B-5
“Display Device List (Command Line Option -t)” on page B-7
“Display LUN List (Command Line Option -l)” on page B-8
“Target Persistent Binding (Command Line Option -p)” on page B-9
“Selective LUNs (Command Line Option -m)” on page B-9
“Boot Device (Command Line Option -e)” on page B-10
“Diagnostics Results—Loopback Test (Command Line Option -kl)” on
page B-11
“Diagnostics Results—Read/Write Buffer Test (Command Line Option -kr)”
on page B-12
“View Driver Settings (Command Line Option -fg)” on page B-12
“Display All Information for One or All Adapters (Command Line Option -z)”
on page B-13
“Link Statistics (Command Line Option -ls)” on page B-16
“HBA Statistics (Command Line Option -gs)” on page B-17
“HBA Alias (Command Line Option -ha)” on page B-18
“HBA Port Alias (Command Line Option -pa)” on page B-18
“HBA Transceiver Details (Command Line Option -dm)” on page B-20
“Host Topology (Command Line Option -tp)” on page B-25
“Display FCoE Information” on page B-27
“Display FCoE Parameters” on page B-27
“Display FCoE Link Events” on page B-27
“Display FCoE DCBX” on page B-29
“Display FCoE Network Interface Statistics” on page B-30
NOTE:
In these sections, the term number refers to the adapter number shown with
the adapter general information (command line option -i).