Q-Logic FC Network Card User Manual


 
3–Interactive Commands
Utilities Menu
SN0054614-00 K 3-73
2. Select the number corresponding to the QLE256x adapter port for which you
want to update firmware, or select the option for All HBAs.
SANsurfer FC/CNA HBA CLI shows the following warning:
Warning:
Please update the HBA firmware area with extreme care.
Incorrectly updating the firmware area may render the HBA
inoperable.
Do you want to proceed with the operation?
1: Yes
2: No
3. Select option 1 to proceed.
4. At the prompt, enter the name of a firmware preload table DAT file.
An example of a typical firmware preload table file header follows:
;Document number: ??
;Document Description: FwArea DATA for standard cards
;
;APPLICATION: ISP25xx FIBRE CHANNEL
;
;NOTE: A companion file with ".DEF" file extension must be present to
; insure that file comparision during DVT testing will pass.
;
;Revision History:
;REV DATE WHO ER# DESCRIPTION OF CHANGE
;
; a 08-24-07 kd xxxxx Initial Document
; b 08-31-07 kc xxxxx Fix entries for Gen2 ZCNT and Gen1 TLTH
; c 09-20-07 kc xxxxx Add Version field. Init Version = 1.
; Set default number of MSI-X vectors to 2
; Add disabled entry for Extended MSI-X
; Disable 1MB Membar 2
; Toggle internal RAM Access enable (HW workaround)
; Set G1CNT = 1
; d 11-09-07 kc 57669 New RX Serdes settings for A1R
; 57767 New TX Serdes settings for A1R
; 57776 L8 A1R Ram Workaround (Swap Addr, RM=00b)
; e 11-13-07 kc 57767b Adjust PCS regs for new TX serdes parms
; f 12-07-07 kc 58189 Add File Version number.
;
; This file is the default settings for the FwArea and must have the
; extension of DAT. Edit this file to change parameters.
;
; Numbers are in hexadecimal. File can also contain comments.