Filter
Top Products
4–Non-Interactive Commands
Command Summary
SN0054614-00 K 4-49
You can use this option with all non-interactive mode options that have a
corresponding interactive mode option (see Table 4-1). This option must be the
first or last command in the command line.
When you use this option, the system shows all result and status messages in
XML format 2, standard XML format. These formats are described in Appendix B.
This option is usually combined with the -o option (see “-o (Output to a File)” on
page 4-37) to create a text file with XML output so that it can be parsed by an
XML-compliant utility. For example, to show adapter general information and
output it to an XML file named output.xml:
# scli -i all -x2 -o output.xml
-z
(Display All HBA information for One or All HBAs)
To show all information for one specific adapter or for all adapters in the system,
type:
# scli -z (<hba instance> | <hba wwpn>) | <all>)
“Host Configuration (Command Line Option -z)” on page 4-2 covers this
command.