Q-Logic FC Network Card User Manual


 
A–XML Format 1
XML Format 1 Tags for Each Option
SN0054614-00 K A-5
For multiple adapters, repeat the preceding sequence with the ID number
(ID Number="value") of the next adapter.
Display HBA Information
(Command Line Option -i)
The XML Format 1 for adapter general information is as follows:
<?xml version="1.0" encoding="ISO-8859-1"?>
<QLogic>
<AppName>SANsurfer FC/CNA HBA CLI</AppName>
<AppVersion>vn.nn.nn Build nn</AppVersion>
<HBA>
<GeneralInfo Port="value"
Model="value"
HBAID="value"
HBAAlias="value"
HBAPort="value"
PortAlias="value"
WWNN="value"
WWPN="value"
PortID="value"
SerialNumber="value"
DriverVersion="value"
BIOSVersion="value"
FirmwareVersion="value"
TargetCount="value"
PCIBus="value"
PCIDevice="value"
ActualConnectionMode="value"
ActualDataRate="value"
PortType="value"
Status="value"
</HBA>
<Status> 0 </Status>
<Reboot> 0 </Reboot>
</QLogic>
Here is the information for the 4G adapters:
<?xml version="1.0" encoding="ISO-8859-1"?>
<QLogic>
<AppName>SANsurfer FC/CNA HBA CLI</AppName>
<AppVersion>vn.nn.nn Build n.nn</AppVersion>
<HBA>
NOTE:
4G adapters include VPD information as an option to the -i command.