Q-Logic FC Network Card User Manual


 
3–Interactive Commands
Help Menu (Command Line Option -h)
3-120 SN0054614-00 K
PFC Enabled on Priority 0: No
PFC Enabled on Priority 1: No
PFC Enabled on Priority 2: No
PFC Enabled on Priority 3: Yes
PFC Enabled on Priority 4: No
PFC Enabled on Priority 5: No
PFC Enabled on Priority 6: No
PFC Enabled on Priority 7: No
Number of Traffic Classes Supported: 8
. . .
Raw
16: FCoE 4: TLV 2: Raw
If you select the Raw option, TLV data appears such as in the following example:
------------------------------------------------------
DCBX Parameters Raw Data for CNA Instance 0 - QLE8142
------------------------------------------------------
Fri May 01 14:27:10 2009
DCBX TLV (Type-Length-Value) Data
=================================
0D 04 0E 00 00 01 00 00
32 32 00 00 00 00 00 00
02 00 0D 00 00 01 00 00
32 32 00 00 00 00 00 00
02 00 0C 00 00 01 00 00
32 32 00 00 00 00 00 00
02 00 02 06 0A 00 08 08
09 00 08 08 08 00 08 01
Help Menu
(Command Line Option -h)
14 (or n): Help
When you enter this option the Help Menu appears with the following options:
Contents
Exit Codes
About
Type the number for the option you want, and then press
ENTER
.